⠀
APPLICATION
The following steps offer a clear overview of how to apply the product. A full, detailed application video will be included with your purchase to guide you through the process once it arrives.
STEP 1
DEFROST THE JAR
Remove the jar from the freezer and let it sit at room temperature for at least 1 hour until the product softens enough to stir.
STEP 2
CLEAN & DRY YOUR HAIR
Wash your hair and scalp thoroughly with shampoo to remove any oils or residue.
Let your hair dry completely before applying the product.
STEP 3
OUTLINE: (If Applying to Hairline and/or Temporal Peaks):
If you're applying to the front hairline and/or temporal peaks, use the provided barber pencil to draw your desired shape. This ensures natural-looking placement.
Skip this step if you're only applying to the crown or mid-scalp.
STEP 4
STIR THE PRODUCT
Use the applicator stick to stir the product well, mixing in any separated natural oils for even consistency.
STEP 5
APPLY TO THINNING AREAS IN SECTIONS
Apply DENSE directly to areas of visible thinning. For full coverage, follow the routine below.
Start at the crown, massaging the product into the scalp with gloves or spreading it evenly using the provided applicator stick. Continue to the front hairline (if needed), then the mid-scalp to connect both areas.
For the front hairline and temporal peaks, apply approximately ½ inch behind the natural hairline to avoid harsh lines. When covering the entire scalp, use wet wipes to gently blend the perimeter where the product meets untreated skin, softening any visible lines for a seamless, natural-looking finish.
Wet wipes are included with your first order. We recommend keeping additional wipes on hand for future applications.
A detailed step-by-step application video is included with every order to guide you through the process.
STEP 6
LET DRY AND WEAR NIGHT CAP
After applying, allow the product to dry fully — about 1 hour. Once dry, wear the provided silk night cap and keep the product on for 5 to 12 hours, depending on your desired stain.
5 hours gives a lighter stain; 12 hours delivers the darkest coverage. We recommend at least 7 hours for best results.
The silk night cap is designed for overnight use — it prevents transfer to your pillow and lets the product work its magic while you sleep. For daytime use, you can also wear it under a ball cap while going about your day.
STEP 7
RINCE & NOURISH
In the morning, rinse with warm (not hot) water. Allow the water to gradually soften the dried paste—this may take 5 minutes or longer, so be patient. Bend forward and use the showerhead to gently rinse the area.
If needed, use only your fingertips in soft, circular motions to help lift any stubborn spots. Be especially gentle if you’ve had a hair transplant.
Shampoo is best avoided to help preserve the application. However, if stubborn product residue is difficult to remove from the hair, a small amount of gentle baby shampoo may be used, taking care to avoid rubbing or disturbing the scalp.
Pat dry with a clean towel. Once completely dry, apply a pea-sized amount of the provided pure jojoba oil to nourish the skin and support healthy dye release.
For best results, avoid water, sweat, or strenuous activity for at least 12 hours after rinsing—this is recommended, though not mandatory.
⠀
STAIN DEVELOPMENT & LONGEVITY
After rinsing, the stain will already be visible and may continue to deepen over the next 24–48 hours as the pigment develops.
During the early stages, hair may display subtle copper-toned hues due to the natural botanical ingredients. This is a normal part of the color development process and typically fades as the pigment settles, becoming less noticeable with the application of the provided jojoba oil.
With proper aftercare, results may last approximately 5–7 days or longer, depending on individual skin characteristics and natural exfoliation. For a consistently dense appearance, we recommend reapplying every 5–7 days.